RVuvSHADE © Windscreen SHADE - Fitting & Cleaning Instructions

FITTING

Installation may take 1 – 4 minutes.

1. Position the aerial hole on the front screen over the aerial.
2. Open the driver’s side door.
3. Position the screen corner door pocket over the top of the door and close the door.
4. Wrap the screen around the windscreen.
5. Open the passenger side door very slightly, just enough to fit the window pocket over the top of the door.
6. Position the screen corner door pocket over the door and close the door.
7. Once the screen has been installed, locate the end of the tensioner tab straps, from inside the vehicle (that are attached by Velcro) and position into the door handle slots inside the vehicle. The tensioner tab straps can be pulled when inside to tighten the screen if needed.
8. Doors can be opened very slightly to adjust the screen if necessary.
9. Doors can only be partially opened when the screen is in place, otherwise it will put excessive strain on the screen seams.

CLEANING

The best way to wash the RVuvSHADE © if needed, is to lay the screen on an area of clean decking or concrete and using a soft-bristled broom, gently wash with mild detergent and let the screen dry naturally in the sun or shade.

gent and let the screen dry naturally in